NHP2400_2026-2027_Smart_Infant_Crib_Project_Planni...

Question

NHP2400_2026-2027_Smart_Infant_Crib_Project_Planning_Report帮我修改这份中的甘特图，并且请生成一个新的word文档，并且其他内容都不要进行修改，就只要修改甘特图，请输出Mermaid Gantt代码，为NHP2400本科项目：Design of Monitoring and Intelligent Control System for Smart Infant Crib Based on STM32。
要求：

项目时间范围：2026‑10‑01 至 2027‑05‑15；
区分：Work package（摘要大工作包，绿色）、Task（子任务，蓝色）、Contingency缓冲任务（黄色）；
任务顺序逻辑：先文献调研，再做风险评估与伦理审查；固件与机械执行器原型部分并行开发；模块测试和开发阶段并行，不全等全部开发结束再测试；末尾设置专门应急缓冲WP7；
设置6个里程碑：
M1 :milestone, m1, 2026‑11‑01, 0d : M1‑Project planning submission
M2 :milestone, m2, 2026‑12‑18, 0d : M2‑System design freeze
M3 :milestone, m3, 2027‑02‑19, 0d : M3‑Prototype built
M4 :milestone, m4, 2027‑03‑26, 0d : M4‑Integrated test complete
M5 :milestone, m5, 2027‑04‑23, 0d : M5‑Draft report
M6 :milestone, m6, 2027‑05‑07, 0d : M6‑Final submission & presentation
全部任务清单：
WP1 Planning（WorkPackage）
1.1 Project planning report
1.2 Risk assessment
1.3 Ethics & safety review

WP2 Research（WorkPackage）
2.1 Literature & safe‑sleep review
2.2 Sensor/component investigation
2.3 Requirements & acceptance criteria

WP3 Design（WorkPackage）
3.1 System architecture
3.2 Hardware circuits & power
3.3 Control logic & UI design

WP4 Development（WorkPackage）
4.1 STM32 firmware
4.2 Wi‑Fi/dashboard integration
4.3 Mechanical/actuator prototype

WP5 Test（WorkPackage）
5.1 Module tests
5.2 Integrated functional tests
5.3 Safety/reliability tests

WP6 Report / Presentation（WorkPackage）
6.1 Results analysis
6.2 Final report
6.3 Final presentation

WP7 Contingency（WorkPackage，黄色缓冲）
7.1 Defect correction / retest
7.2 Submission buffer / final QA

配色设置：
section Work‑Package 用 #60ad5e（绿色）
section Task 用 #4488dd（蓝色）
section Contingency 用 #f2bc3c（黄色）
输出仅输出完整可直接渲染的Mermaid gantt代码块，不要多余解释文字；
开启显示日期，横轴按月显示；里程碑标记在对应时间点；
逻辑约束：风险评估、伦理审查任务，放在文献综述任务启动之后；4.1固件和4.3机械原型存在并行时间；5.1模块测试与WP4开发并行。

Answer 1

[新Word文档] (NHP2400_2026-2027_Smart_Infant_Crib_Project_Planning_Report.docx)

mermaid
%%{init: {
  "theme": "base",
  "themeVariables": {
    "fontFamily": "Arial",
    "taskBkgColor": "#4488dd",
    "taskBorderColor": "#2f67ad",
    "taskTextColor": "#ffffff",
    "activeTaskBkgColor": "#60ad5e",
    "activeTaskBorderColor": "#3f8a3d",
    "activeTaskTextColor": "#ffffff",
    "critBkgColor": "#f2bc3c",
    "critBorderColor": "#c99113",
    "critTextColor": "#222222",
    "gridColor": "#dddddd",
    "todayLineColor": "#777777"
  }
}}%%
gantt
    title NHP2400 - Design of Monitoring and Intelligent Control System for Smart Infant Crib Based on STM32
    dateFormat YYYY-MM-DD
    axisFormat %b %Y
    tickInterval 1month
    todayMarker off

    section WP1 Planning
    WP1 Planning                              :active, wp1, 2026-10-01, 2026-11-13
    1.1 Project planning report               :t11, 2026-10-01, 2026-10-31
    1.2 Risk assessment                       :t12, 2026-10-12, 2026-11-06
    1.3 Ethics & safety review                :t13, 2026-10-19, 2026-11-13

    section WP2 Research
    WP2 Research                              :active, wp2, 2026-10-01, 2026-11-20
    2.1 Literature & safe-sleep review        :t21, 2026-10-01, 2026-11-06
    2.2 Sensor/component investigation        :t22, 2026-10-19, 2026-11-13
    2.3 Requirements & acceptance criteria    :t23, 2026-11-02, 2026-11-20

    section WP3 Design
    WP3 Design                                :active, wp3, 2026-11-16, 2026-12-18
    3.1 System architecture                   :t31, 2026-11-16, 2026-11-27
    3.2 Hardware circuits & power             :t32, 2026-11-23, 2026-12-11
    3.3 Control logic & UI design             :t33, 2026-11-30, 2026-12-18

    section WP4 Development
    WP4 Development                           :active, wp4, 2026-12-19, 2027-02-19
    4.1 STM32 firmware                        :t41, 2026-12-19, 2027-02-19
    4.2 Wi-Fi/dashboard integration           :t42, 2027-01-18, 2027-02-19
    4.3 Mechanical/actuator prototype         :t43, 2027-01-04, 2027-02-12

    section WP5 Test
    WP5 Test                                  :active, wp5, 2027-01-18, 2027-03-26
    5.1 Module tests                          :t51, 2027-01-18, 2027-02-26
    5.2 Integrated functional tests           :t52, 2027-02-15, 2027-03-12
    5.3 Safety/reliability tests              :t53, 2027-03-08, 2027-03-26

    section WP6 Report / Presentation
    WP6 Report / Presentation                 :active, wp6, 2027-03-22, 2027-05-07
    6.1 Results analysis                      :t61, 2027-03-22, 2027-04-09
    6.2 Final report                          :t62, 2027-03-29, 2027-05-07
    6.3 Final presentation                    :t63, 2027-04-12, 2027-05-07

    section WP7 Contingency
    WP7 Contingency                           :crit, wp7, 2027-04-24, 2027-05-15
    7.1 Defect correction / retest            :crit, t71, 2027-04-24, 2027-05-07
    7.2 Submission buffer / final QA          :crit, t72, 2027-05-01, 2027-05-15

    section Milestones
    M1-Project planning submission            :milestone, m1, 2026-11-01, 0d
    M2-System design freeze                   :milestone, m2, 2026-12-18, 0d
    M3-Prototype built                        :milestone, m3, 2027-02-19, 0d
    M4-Integrated test complete               :milestone, m4, 2027-03-26, 0d
    M5-Draft report                           :milestone, m5, 2027-04-23, 0d
    M6-Final submission & presentation        :milestone, m6, 2027-05-07, 0d

NHP2400_2026-2027_Smart_Infant_Crib_Project_Planni...

問題

思考

思考

思考

回答

問題

畫圖

分享這個問答