smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.1.79-Unraid] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family: HGST Ultrastar He10
Device Model: HGST HUH721010ALE600
Serial Number: 1SJTBPRZ
LU WWN Device Id: 5 000cca 26be743d6
Add. Product Id: DELL(tm)
Firmware Version: LHDELT03
User Capacity: 10,000,831,348,736 bytes [10.0 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database 7.3/5601
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Mar 3 10:47:37 2025 CST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Disabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 90) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: (1070) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0
2 Throughput_Performance --S--- 134 134 000 - 96
3 Spin_Up_Time POS--- 218 218 024 - 302 (Average 301)
4 Start_Stop_Count -O--C- 100 100 000 - 1554
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0
7 Seek_Error_Rate -O-R-- 100 100 000 - 0
8 Seek_Time_Performance --S--- 128 128 000 - 18
9 Power_On_Hours -O--C- 099 099 000 - 8213
10 Spin_Retry_Count -O--C- 100 100 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 83
22 Helium_Level PO---K 100 100 025 - 100
192 Power-Off_Retract_Count -O--CK 099 099 000 - 1674
193 Load_Cycle_Count -O--C- 099 099 000 - 1674
194 Temperature_Celsius -O---- 139 139 000 - 43 (Min/Max 8/58)
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O---K 100 100 000 - 0
198 Offline_Uncorrectable ---R-- 100 100 000 - 0
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 1
223 Load_Retry_Count -O-R-- 100 100 000 - 0
241 Total_LBAs_Written -O--C- 100 100 000 - 1498863883597
242 Total_LBAs_Read -O--C- 100 100 000 - 335106974508
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning

General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 1 Comprehensive SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x04 GPL R/O 256 Device Statistics log
0x04 SL R/O 255 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x0c GPL R/O 5501 Pending Defects log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x12 GPL R/O 1 SATA NCQ Non-Data log
0x13 GPL R/O 1 SATA NCQ Send and Receive log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x24 GPL R/O 256 Current Device Internal Status Data log
0x25 GPL R/O 256 Saved Device Internal Status Data log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xdf GPL,SL VS 1 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
Device Error Count: 1
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 1 [0] occurred at disk power-on lifetime: 1193 hours (49 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 30 00 00 c4 6d 24 b7 40 00 Error: ICRC, ABRT 48 sectors at LBA = 0xc46d24b7 = 3295487159

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 00 40 00 00 c4 6d 24 a8 40 00 10:42:03.000 WRITE DMA EXT
35 00 00 00 40 00 00 c4 6d 24 60 40 00 10:42:02.999 WRITE DMA EXT
35 00 00 00 50 00 00 c4 6c 7e a8 40 00 10:42:02.997 WRITE DMA EXT
35 00 00 00 18 00 00 c4 6c 7c 98 40 00 10:42:02.996 WRITE DMA EXT
35 00 00 00 20 00 00 c4 6c 7c 78 40 00 10:42:02.995 WRITE DMA EXT

SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error

1 Vendor (0xdf) Completed without error 00% 3 -

2 Short offline Completed without error 00% 2 -

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
Device State: Active (0)
Current Temperature: 43 Celsius
Power Cycle Min/Max Temperature: 37/43 Celsius
Lifetime Min/Max Temperature: 8/58 Celsius
Under/Over Temperature Limit Count: 0/0

SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -40/70 Celsius
Temperature History Size (Index): 128 (23)

Index Estimated Time Temperature Celsius
24 2025-03-03 08:40 40 *********************
... ..( 13 skipped). .. *********************
38 2025-03-03 08:54 40 *********************
39 2025-03-03 08:55 41 **********************
... ..( 25 skipped). .. **********************
65 2025-03-03 09:21 41 **********************
66 2025-03-03 09:22 42 ***********************
... ..( 23 skipped). .. ***********************
90 2025-03-03 09:46 42 ***********************
91 2025-03-03 09:47 43 ************************
... ..( 30 skipped). .. ************************
122 2025-03-03 10:18 43 ************************
123 2025-03-03 10:19 42 ***********************
124 2025-03-03 10:20 43 ************************
125 2025-03-03 10:21 42 ***********************
... ..( 3 skipped). .. ***********************
1 2025-03-03 10:25 42 ***********************
2 2025-03-03 10:26 43 ************************
... ..( 19 skipped). .. ************************
22 2025-03-03 10:46 43 ************************
23 2025-03-03 10:47 40 *********************

SCT Error Recovery Control:
Read: 80 (8.0 seconds)
Write: 80 (8.0 seconds)

Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 83 --- Lifetime Power-On Resets
0x01 0x010 4 8213 --- Power-on Hours
0x01 0x018 6 1498863918389 --- Logical Sectors Written
0x01 0x020 6 3799697203 --- Number of Write Commands
0x01 0x028 6 335106987316 --- Logical Sectors Read
0x01 0x030 6 2549755626 --- Number of Read Commands
0x01 0x038 6 29567573100 --- Date and Time TimeStamp
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 46918 --- Spindle Motor Power-on Hours
0x03 0x010 4 46917 --- Head Flying Hours
0x03 0x018 4 1674 --- Head Load Events
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
0x03 0x028 4 4810769 --- Read Recovery Attempts
0x03 0x030 4 1 --- Number of Mechanical Start Failures
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 3882 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 43 --- Current Temperature
0x05 0x010 1 39 N-- Average Short Term Temperature
0x05 0x018 1 27 N-- Average Long Term Temperature
0x05 0x020 1 58 --- Highest Temperature
0x05 0x028 1 8 --- Lowest Temperature
0x05 0x030 1 54 N-- Highest Average Short Term Temperature
0x05 0x038 1 8 N-- Lowest Average Short Term Temperature
0x05 0x040 1 46 N-- Highest Average Long Term Temperature
0x05 0x048 1 12 N-- Lowest Average Long Term Temperature
0x05 0x050 4 0 --- Time in Over-Temperature
0x05 0x058 1 60 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 3 --- Number of Hardware Resets
0x06 0x010 4 43 --- Number of ASR Events
0x06 0x018 4 1 --- Number of Interface CRC Errors
0xff ===== = = === == Vendor Specific Statistics (rev 1) ==
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value

Pending Defects log (GP Log 0x0c)
No Defects Logged

SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS

这个是我机械硬盘的SMART信息，请帮我总结一下