logoChat01.ai

Can you make some adjustments to this for me pleas...

Erstellt am: 15. Januar 2026

Beantwortet mit GPT-5.2 Thinking von Chat01

Frage

ChatGPT Image Jan 15, 2026, 10_26_44 AM.png

Can you make some adjustments to this for me please, leaving as much details as is, as possible. Beside the instructions below...

Can you make the picture in an 8k resolution, viewing both the front of the jersey and the back of the jersey.

Can you remove the neon yellow and neon blue lines that are around the collar on the back view of the jersey and around the collar on the front view of the jersey, and that run down the jersey.

Can you make the neck a standard rounded neck.

Can you make a white outline around the collar, a half inch from the top of the collar showing on both the front and back views of the jersey.

Can you put a white sleeve end border of white on the sleeve with the stars. Make it wrap around the sleeve fully a half inch from the end of the sleeve, showing on both the front and back views of the jersey.

Can you space out the front view of the jersey and the back view of the jersey, so in the picture there is a little more of a gap in between the two views of the jersey. Maybe an inch or two gap.

For adjusting the back view of the jersey for one of the sleeves, can you have the one white sleeve like on the left arm front jersey view, can it be white for that same sleeve on the back view also. (which on the back view it will be showing on the right)

For the back and front views of the jersey, for the one sleeve with stars, can you have the stars fade out into the black as they get to the bottom of the sleeve.

Can you remove the logo on the white sleeve. Can you take the WI state logo on the front of the jersey off, it's by the tummy. Can you apply that WI state logo onto the white sleeve, that can will be seen from the front jersey view and the back jersey view.

Gedanke

Adjusting sleeve colors in jersey view

The jersey has stars on both sleeves but there’s a question about adjusting the back view. The instruction is to make the right sleeve white, just like the left sleeve on the front of the jersey. So, facing away, the back should show the right sleeve as white.

Adjusting sleeve and logo details on jersey

For the jersey update, one sleeve should be white on both the front and back, while the opposite sleeve stays black with stars fading toward the bottom. The current logo on the white sleeve should be removed, and the Wisconsin state logo (with the M inside) should be scaled down and moved to the white sleeve. This applies to both front and back views.

Clarifying logo details for sleeve adjustment

The "WI state logo" likely refers to the outline of Wisconsin with the M emblem inside. This graphic will be moved to the white sleeve, but just the state outline, not the M. Also, I’ll ensure other details like "GUMMY TIME", "JERRY 10", and “The Newfangled” remain unchanged. I’ll remove the previous logo and keep the lightning effect.

Ensuring consistency and image generation for jerseys

Both jerseys need the same changes: rounded necks, white outlines, and sleeve borders. I'll use image editing to make the adjustments, aiming for a photorealistic mockup. I’m considering whether to reference the specific image ID or just describe the changes. It'll help to ensure match details as closely as possible.

Replicating and editing jersey design

To meet the user's request, I'll describe the jersey design in detail, especially focusing on exact changes like removing neon lines, adding a rounded collar with white piping, and adjusting sleeve colors. I'll use a text-to-image approach to create a new mockup based on the description, ensuring precision for front and back views.

Clarifying sleeve and logo placement on jersey

To ensure consistency, I'll make sure the front left sleeve (from viewer's perspective) is black with stars and the right sleeve is white. On the back, the left sleeve will also be black with stars, and the right sleeve will be white. I’ll add the Wisconsin logo to the white sleeve and remove other logos as specified.

Thought for 1m 24s

Bild

{"size":"1792x1024","n":1,"transparent_background":false,"prompt":"Create an ultra-high-resolution (8K) realistic product mockup image on a clean light gray/white studio background showing TWO views of the same jersey side-by-side: BACK view on the left and FRONT view on the right, with a slightly larger gap between them (about 1–2 inches of empty space).\n\nKeep the jersey design, typography, colors, and textures as close as possible to the provided image, EXCEPT for these required edits:\n\n1) Remove all neon yellow and neon blue piping/lines: remove the colored collar rings on both jerseys AND remove the vertical neon lines that run down the front jersey.\n2) Change the neckline to a standard rounded crew neck (no V-neck, no buttons). Add a WHITE outline/piping around the collar that sits about 0.5 inch below the top edge of the collar, visible on both the front and back views.\n3) Sleeves:\n - One sleeve is WHITE (the wearer’s left sleeve). Ensure it is white on BOTH views: on the FRONT view it appears on the viewer’s right; on the BACK view it appears on the viewer’s right.\n - The other sleeve is BLACK with white stars. On BOTH views, make the stars gradually fade out into solid black as they approach the bottom of the sleeve.\n - Add a white sleeve-end border band ONLY on the star sleeve: a white wrap-around band located about 0.5 inch from the sleeve hem, visible in both views.\n4) Remove the existing logo/patch graphic currently on the white sleeve.\n5) Remove the Wisconsin (WI) state-shaped logo/graphic from the front torso area (near the tummy). Then place that same Wisconsin state-shaped logo/graphic onto the WHITE sleeve instead (centered on the sleeve), visible from both the front and back views.\n\nPreserve everything else: the black jersey body fabric, the chest script text "The Newfangled", the small front number "10", the back text "GUMMY TIME" above the name, the name "JERRY", the large back number "10", overall shadows, stitching, and realistic fabric folds. Ensure both jerseys remain the same scale and aligned like a professional apparel mockup."}

user-XqMt5XR27ulMOi5c7RPmChmK__7ad93a2c-d91b-47c8-8299-8896d076d2a0/17a9d0bd-8b7f-406f-9c5d-44cb2ef6b6f4.png

Frage

can you remove the buttons, it should be a pull-over jersey with a standard rounded neck, not a button-up.
can you make the back view of the jersey, on sleeve should be white with a logo like on the front, both sleeves on the back shouldn't have stars. And on the front of the jersey the black sleeve should have stars like it does on the back view.

Frage

17a9d0bd-8b7f-406f-9c5d-44cb2ef6b6f4.webp

can you remove the buttons, it should be a pull-over jersey with a standard rounded neck, not a button-up.
can you make the back view of the jersey, on sleeve should be white with a logo like on the front, both sleeves on the back shouldn't have stars. And on the front of the jersey the black sleeve should have stars like it does on the back view.

Diesen Q&A teilen